Car Radio Code Calculator

Tips for Mercedes Wiring Diagrams and Schematics   Smart Smart 1998   There is no speedpulse. A hall generator can be installed at the right or left rear wheel. (VDO-Kienzle no. for generator only: 06004.010003). Installation kit to order at: Kienzle Rheinapp GmbH, Alexanderstr. 37-39, 45472 Mühlheim an der Ruhr, Germany, P -     At the right or left rear wheel, opposite to the ABS sensor there is a hole. Pull through the threaded pin of the speedpulse sensor. Install the two washers on both ends of the hole. Use a screw-glue (important!), e.g. LOCTITE. The distance between th Mercedes Benz C 280 Mod.94 1994   At the radio connector. Green/white.     Wiring Diagrams Mercedes Benz E200 Compressor     At ISO-Radio connector Gree...

Installing and Removing marcedes COMAND & Audio on models E & CLS Firstly remove the wooden surround panel around the gearstick. On the W211 E class you just pull up the front edge (it is hooked in at the rear edge), and the whole panel comes up. On the W219 CLS it is easier to leave the wood surround in place and pull up the metal surround of the actual gear lever, then you can reach through the hole and push the catches (you can feel one at each end of the front edge of the trim) whilst pulling the wood trim up from the front. Once the panel is pulled up, you can see a knurled plastic nut at the bottom of the gearknob itself, rotate anti-clockwise, unplug all the wires connected to the panel and then pull the gearknob upwards and remove the panel. Now you need to release the catches that hold the ashtray in place, there are two and they clip slightly forward using a screwdriver, whist applying pressure with the screwdriver pull the ashtray upward. Unplug the blu...