Mitsubishi mirage 2000 radio code entry instructions

How to Enter the mirage 2000 Mitsubishi Radio Code

Your car stereo in Mitsubishi mirage 2000 uses an auto-locking system so that whenever the battery is cut to the radio, it will be locked and will ask for code. Your car radio will be protected from unauthorized use with the help of this feature. However, if you need to disconnect the battery to make some repair in your oune mirage 2000 auto, you will need to know the code entry instruction for car radio, so that you can use the stereo again.mirage 2000

Turn the ignition key to the "II" position and turn on the Mitsubishi 2000 Radio.

Wait a moment until you see the words "CODE" displayed on the digital screen of your Mitsubishi 2000 mirage .

Using the numeric keypad on your stereo Enter the radio code given to you by your Mitsubishi dealership.

Note: if you don’t have your mirage Mitsubishi 2000 unlock code, please go to the Mitsubishi radio code section or use the search bar in the top of the page.

read more

Ford Radio Code

How Can I Decode My Ford Radio Code

If your Ford auto has suffered a flat battery, or has been in the repair shop and had it's battery disconnected,fords-radio-code you'll often need to re-enter the radio security code. This is fine as long as you are the original ford owner or have access to the correct Ford stereo code. If you don't have the keycode though, tracking it down can be difficult or impossible. Where that's the case, you are left with two options, either to replace the original ford radio, or to unlock it by restoring the lost ford radio code!

Step by step to decode your Ford radio code

If you've lost your Ford radio code, you can recover it quickly and easily. To do this, all you need to do is:
  • Remove the stereo from the dash.
  • Locate the unit serial number.
  • install the Ford radio code calculator.
  • Enter the generated code to your ford stereo.
Once you have done all this, you will be able to listen to all your favorite radio programs again!

Locating serial number to unlock ford stereo code

Depending on your car model, Ford car radio removal and Ford serial number location may be a little bit different, but in most cases it is like this:fordserial
Place the ford radio removal tool in the two holes on etch side of the Ford stereo. These holes are stacked on top of each other, to remove your stereo simply insert the removal keys, push them until you hear click next, place one hand on each key and pull them apart toward the doors then pull the stereo out of the dash entirely.
Once you've removed the ford autoradio from the dashboard, you will need to note your serial number printed on the sticker at the top or right hand side of the radio unit next to the bar code, it can be also engraved at one of the radio sides. Take note of all this information, we will need it to restore Ford radio code.

calculate and run Ford radio code

You can make a quick search using the Google searchbox at the top of the page, just type in your ford radio model and hit enter and you will get all you need about the specific car radio model. Now, enter your serial number then your ford unlocking code is generated instantly, all you have to do after that is to enter it to your car radio. Don't worry it is so simple to do, and to make it easier take a look at this ford radio code video tutorial:

Detailed instructions for Ford radio Code Entry :

Now you have your Ford stereo code, Follow these steps to enter it:
- Switch on the Radio.ford radio
- Display Shows CODE with " - - - - " flashing.
- Press preset " 1 " repeatedly for 1st Digit.
- Press preset " 2 " repeatedly for 2nd Digit.
- Press preset " 3 " repeatedly for 3rd Digit.
- Press preset " 4 " repeatedly for 4th Digit.
If the correct ford radio code number is now shown.
- Press preset " 5 " to Enter.
At the end, I hope that this ford stereo code recovery guide was helpful for you. If you still have problems or questions about  ford radio wiring diagram, manuals, ford radio repair or any information about free ford radio codes, a person can blog post opinions and advice whenever you want and I'm going to make an attempt to support. Equally, I highly suggest one to take advantage of the search-box in the top to obtain additional information, merely input your current Ford stereo unit or used car device to locate solutions relating to this.
read more

Philips Radio Code

Need a Philips radio code? I’m ready to help you.

From now you will get the ability to recover your Philips radio codes right from the autoradio serial number, philips-radio-codePreCode or even EEPROM Dump files(.bin), it is so easy, just have one of the philips radio code decoders. You need to have the serial number of your Philips car stereo unit, which can simply be found on the radio chassis. 

Philips stereo code :

By having a Philips radio code decoder you will be able to unlock codes for Philips, VDO and Renault cassette or cd players, it is also possible, using these tools, to generate code for the majority of Philips radios produced up to the year 2000, including factory radios fitted to: Mitsubishi, Peugeot, Honda, Opel, Renault, MG, Fiat, BMW, Land Rover, Vauxhall, Citroen and so.

Philips car radio serial number location | Brief guide :

The philips serial number can be located etched on the chassis of the car radio and may require some cleaning to see it, it is usually situated in the side of your radio unit and generally starts with letters like ; PH, GM. RN, RG, AL or VO and will be 14 digits in length.
Take note: - The number starting with FD isn’t your serial number.
                  - You must remove the car stereo from your vehicle using the philips radio removal keys.
I hope this little guide was helpful for you to get your Philips radio code. In case you still have some problems you can use the Google search bar on the top of the page or post comments and I'm sure you will get the solution to your problem.
read more

Philips CCR600 Code

The right way to Initialise any Philips CCR600 car radio code

Created on the Netherlands in 1891, Philips Electronics is often a well-known international technology enterprise that delivers acoustic instruments intended for house and car use. Philips CCR600 car stereos tend to be associated with autos from widely used auto-makers like General Motors.
Philips CCR 600 car radio involve an anti-theft feature that needs you to enter in an activation code constructed from 4 Digits before somebody can open the radio unit for the first time.

Philips-CCR600-Code 
You will have to enter the Philips CCR600 code any time your stereo screens the "Code" message to re-establish control of this philips radio and audio control panel.

Philips CCR 600 stereo code entry instructions

Initially, in the facade panel, push and hold  "AS" switch while turning on the CCR600 stereo ; you will notice "Code" on the digital display. I you don’t have this message then your Philips radio is code-locked, that means that you will have to leave it on until you see "Code" in the screen, otherwise continue reading. 

Apply the cassette or cd player preset control buttons to provide the four-digit Philips CCR600 stereo code. By way of example, if the reset code was "2976" you should click on the "Preset 2" button two times, "Preset 9" nine times, "Preset 7" seven times and finally "Preset 6" six times.
To end, Simply click the "AS" key again in order to save the inserted code and activate the philips ccr600 car radio unit.
Note: if you are looking for how to calculate your CCR600 RADIO CODE, then go to the philips stereo code section.
If you still have some questions you can post comments or use the google search bar on the top of this page.
read more

Chrysler car radio code Model P4704345-F

Code for
Chrysler Corp.
Model: P4704345-F
Exemple of serial number : T Q1 AA 345 5 37005

CHRYSLER P4704345-F
Problem Solved: Turn on the radio without the eeprom chip and enter code '1234'
 Try this tip and tell me the result ;)
read more